Platic flush Cistern For Installation Into Vanities

1.one blow moulded HDEP 2.Cistern cover for both top and front flush 3.Dual flush valve ,adjustable for 3/4.5L, 3/ 6L or 4/7L

 Plastic flush cistern  (135mm tickness)for wall hung toilet (CE certificate)

 Feature specifications:

 

1) Three flushes, can be adjusted to 3/4.5°3/6°4/7 litresthe structure and capability of cistern

    conforms to EN14055 standard.

2) The inlet valve with low noise design, conforms to the EN14124 standard.

3) Pneumatic flush valve and push button, multi-directional installation for push button,

     convenient  for flexible design of cabinets.

4) Tank is made of HDPE by blow moulding with high strength and anti-aging capability. With

    high intensity of EPS insulation shell bonded to the exterior of cistern to prevent

    the formation of water condensation.

5) The angle valve is available for closing down the water head while maintenance.

6) The  direction  of  cistern  cover  can  be  switched  between  top  and  front,  and  the

    maintenance access can be achieved by removing the top or front panel.

7)  Gap on top right shoulder of tank is appropriately designed to give enough space for use

     of button installed at front right position.

8)  Flush bend is made of PP by blow moulding with smooth and fast flushing.

    Rubber sealing connector is available.

Product size: 

Push button options:

/p

Platic flush Cistern For Installation Into Vanities